1. First of all, make sure that the installation of water well drilling tools should be carried out by skilled operators, and one person is responsible for the order.

　　2. Secondly, before determining the installation of water well drilling tools, the topography, geology, hydrology, weather, and flood level should be investigated.

　　3. According to the water well drilling tools of the horizontal site, the installation needs to install the drill base, tower, ground anchor, etc.

　　4. Flatten a solid part of the predetermined orifice, the area should not be less than 53.3m2, the front of the wellhead may be uneven, but there should be no obstacles above 1m.

　　5. When the water well drilling tools are installed with ground beams, the diesel engine transmission and hoist are fixed on the base of the drilling rig.

　　How to improve the production efficiency of water well drilling tools? Let's talk about the precautions for using it.

　　1. After the drill bit of the water well drilling tools is drilled into the structure, the center drilling tool needs to be replaced in time. First, you need to clean the bottom of the hole, and then blow to the residue at the bottom of the hole. After the drill stops rotating, drill out the drill in the water well drilling tools. It is the most suitable when the lifting force is slowly increasing and the lifting force is just enough to lift the drill bit.

　　2. The drilling process summarizes the drill bit of water well drilling tools. It is also necessary to pay close attention to the subsequent working conditions of the casing, to understand the specific situation of the drilling in time, to clean the hole in time, and to drill the bit on the water well drilling tools. During this process, strong lifting is prohibited.

　　3. At the bottom of the water well drilling tools, there will be more debris. The eccentric drill bit will be stuck by the slag and affect its collection and production. At this time, it is necessary to deliver compressed air and clean the holes again. And let the down-the-hole hammer work for a short period, water well drilling tools model, and then re-do the lifting work of the center drill.